1. <em id="a9gmu"><acronym id="a9gmu"><u id="a9gmu"></u></acronym></em>

  2. <th id="a9gmu"></th><tbody id="a9gmu"></tbody>

      您好,歡迎訪問濟南七和模具有限公司 !

      濟南七和模具有限公司

      主做模具鋼材生產研發,保障質量

      全國服務熱線

      4008379668

        當前位置:首頁>新聞中心>新聞動態>怎么區分及采用塑膠模具鋼和塑料模具鋼?

        怎么區分及采用塑膠模具鋼和塑料模具鋼?

        來源:http://www.environmentandpeople.net/ 日期:2022-04-01 發布人:guanli


        模具鋼在具體使用產品的過程中,可以進行二次包裝。
        Mold steel can be repackaged during the specific use of products.
        什么是二次包裝?二次包裝意指該產品需要某種鋼材,但是鋼材的外包裝并不符合實際所需要的本質,影響產品的本質有多種多樣的原因,可能是外包裝,也有可能是受到空氣和其他成分的影響。
        What is secondary packaging? Secondary packaging means that the product needs some kind of steel, but the outer packaging of steel does not meet the essence of actual needs. There are various reasons affecting the essence of the product, which may be the outer packaging or the influence of air and other components.
        為了避免產品質量受到影響,部分使用者通常會選擇在鋼材的外表添加膜,這種膜絕大部分會采納塑料或者塑膠。
        In order to avoid the influence of product quality, some users usually choose to add film on the surface of steel. Most of this film will adopt plastic or plastic.
        使用了塑料或塑膠的模具鋼會跟原來的模具鋼有什么不一樣嗎,會不會產生什么變化?其中兩者之間的優勢和分類又是如何?
        Will the die steel made of plastic or plastic be different from the original die steel, and will there be any changes? What are the advantages and classifications between the two?
        下面就給大家一一作出詳細的解釋。
        Let's give you a detailed explanation one by one.
        塑膠模具鋼和塑料模具鋼有哪些區別?
        What are the differences between plastic mold steel and plastic mold steel?
        塑膠模具鋼和塑料模具鋼盡管只有一字之差,但它們的屬性還是有區別的。
        Although there is only one word difference between plastic mold steel and plastic mold steel, their properties are still different.
        塑膠模具鋼有哪些?
        What are the plastic mold steels?
        塑膠模具鋼分預硬普通塑膠模具鋼,預硬塑膠模具鋼,預硬高硬度塑膠模具鋼,預硬抗腐鏡面塑膠模具鋼,抗腐鏡面塑膠模具鋼五小類。
        Plastic mold steel is divided into five categories: pre hardened ordinary plastic mold steel, pre hardened plastic mold steel, pre hardened high hardness plastic mold steel, pre hardened anti-corrosion mirror plastic mold steel and anti-corrosion mirror plastic mold steel.
        滲碳型塑料模具鋼:P1,P2,P3,P4,P5,P6。這類鋼含碳量很低,主要是美國早期及用擠壓成型制模法,要求冷塑性好,有高的擠壓性能,成型后表面滲碳淬火提高表面硬度,使用壽命長。芯部超低碳可使淬火時變形量也更小。
        Carburized plastic die steel: P1, P2, P3, P4, P5, p6. The carbon content of this kind of steel is very low, mainly in the early United States and the extrusion molding method, which requires good cold plasticity and high extrusion performance. After forming, the surface carburization and quenching can improve the surface hardness and long service life. Ultra low carbon in the core can reduce the deformation during quenching.
        調質型塑料模具:P20,P21。塑料模具中P20的用量很大,已成為主體,大多數在預硬狀態時使用。中碳合金工具鋼用于熱固性塑料模。鋼號有H13,而L2和S7,O1和A2也有應用。
        Quenching and tempering plastic mould: P20, p21. The amount of P20 in plastic mold is very large, which has become the main body, and most of them are used in the pre hardening state. Medium carbon alloy tool steel is used for thermosetting plastic molds. Steel grades are H13, while L2 and S7, O1 and A2 are also used.
        不銹鋼用于耐蝕性要求高的塑料模,主要鋼號有420,414L,440,416。
        Stainless steel is used for plastic molds with high corrosion resistance requirements. The main steel grades are 420414l and 440416.
        時效鋼是經過時效處理而獲得高的使用性能鋼材。
        Aging steel is a kind of high performance steel obtained by aging treatment.
        低碳Ni-A1時效鋼;18Ni馬氏體時效鋼是用于宇航工業的無碳純度高、高強度、高韌性的材料。用于力學性能、尺寸精度、光潔度和耐蝕性都要求高的塑料模具。
        Low carbon Ni-A1 aging steel; 18Ni Maraging steel is a carbon free material with high purity, high strength and high toughness used in aerospace industry. It is used for plastic molds that require high mechanical properties, dimensional accuracy, finish and corrosion resistance.
        如何采用塑料模具鋼?
        How to use plastic die steel?
        1.薄壁的塑料箱體,生產批量在小于10萬件時,用P20,P21預硬態(HB250~300),腐蝕性較強時用414L。
        1. For thin-walled plastic boxes, when the production batch is less than 100000 pieces, P20 and p21 are used for pre hardening (hb250 ~ 300), and 414l is used for strong corrosion.
        2.高壽命的普通塑料模,用P6或P20,經滲碳一淬火后硬度在HRC54-58,塑料件不太大時,可用O1、S7。腐蝕性較強時用420。
        2. P6 or P20 is used for ordinary plastic mold with high service life. After carburizing and quenching, the hardness is hrc54-58. When the plastic part is not too large, O1 and S7 can be used. 420 for strong corrosivity.
        3.非高溫的熱固性模用P6,P20經滲碳淬火后使用。腐蝕性強用420。
        3. P6 and P20 for non high temperature thermosetting die are used after carburizing and quenching. Highly corrosive 420.
        4.高溫熱固性塑料模用H13和S7或滲碳鋼P4。這些含鉻較高有好的抗回火性和抗高溫氧化性。
        4. H13 and S7 or carburized steel P4 for high temperature thermosetting plastic mold. These contain high chromium and have good tempering resistance and high temperature oxidation resistance.
        以上就是為大家介紹的有關山東塑料模具鋼的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以專業的態度,為您提供服務http://www.environmentandpeople.net
        The above is the detailed introduction of Shandong plastic die steel, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.environmentandpeople.net

        咨詢熱線:4008379668

        郵箱:qihemuju@163.com

        地址:山東省濟南市鮑山辦事處簡家屯村內村委會向西50米

        備案:魯ICP備19056638號-1

        技術支持:網站建設·推廣運營?

        流量統計:

        網站地圖    TXT    XML

        七和模具二維碼

        七和模具二維碼

        中文无码精品a∨在线观看

        1. <em id="a9gmu"><acronym id="a9gmu"><u id="a9gmu"></u></acronym></em>

        2. <th id="a9gmu"></th><tbody id="a9gmu"></tbody>